djive Vacumate One Manual Del Usuario página 19

Docking the mopping tank onto the cordless vacuum cleaner
1. Lay the mopping tank flat on the ground so that the hollow is visible on the
top. Take the cordless vacuum cleaner and use the large sliding wheels of
the floor brush attachment to position the appliance above the mopping
tank recess.
2. Now push the cordless vacuum gently down until the appliance snaps into
the mopping tank with an audible "click".
3. At the top of the mopping tank there is a button to start or stop the water
supply. If the button is raised towards the suction pipe, the water supply
starts after a few moments. The water supply is stopped if the button is
pressed down.
4. Each time you finish mopping, disconnect the mopping tank from the
cordless vacuum cleaner and store it separately, empty and with the tank
lid open.
1.
2. 3.
19