Removing & Cleaning The Upholstery Brush - djive Vacumate One Manual Del Usuario

REMOVING AND CLEANING THE
UPHOLSTERY BRUSH \\\
1. Make sure that you do not press the ON switch.
2. Disconnect the motorised upholstery brush unit from the suction tube or
handle unit and turn the cleaning attachment over so that the bottom of the
cleaning head is facing you.
3. Before replacing, make sure that both the bristle brush and the cleaning
attachment are completely dry.
4. To remove the bristle brush, press the release button on the side of the
housing and remove the brush for cleaning. Now remove hair wrapped
around the brush and fluff from the bristle brush and sides of the
suspension. Also clean the brush shaft.
5. First, slide the bristle brush back onto the clip in the motorised upholstery
brush. The other end cap should face up with the straight side of the
suspension rail. Gently push the bristle brush down the suspension rail until
it snaps into place with an audible "click".
30
ATTENTION
Disconnect the brush attachment from the
cordless vacuum cleaner at the beginning