Preliminary Operations; Remote Control - MO-EL MO000023 Manual De Instrucciones

PRELIMINARY OPERATIONS

-Remove the appliance from its packaging.
-Check that all the contents are present in the box: instruction manual,
warranty, remote control, and the appliance itself.
-Open the front hatch and pour in clean water. The water level must
always be between the two lines, MIN and MAX. (Fig.1)
-Alternatively, attach the tank to a tap via a length of hose to allow for
automatic filling. (Fig.2)
-Plug the appliance into a power socket.
-Press the ON/OFF button on the remote control or directly on the
product's button panel.
-To further increase the cooling effect, add ice in the dedicated upper
tank; this will further cool the water and therefore the air coming out
of the appliance. (Fig.3)
-The angle of the horizontal vanes can be adjusted in order to more
precisely direct the flow of cool air. To do so, take hold of one of the
central points where the vanes are connected together via two verti-
cal columns, and pull up or down. Do not apply too much force in
order to prevent breakages.
Fig.3
Fig.1
Fig.2

REMOTE CONTROL

The remote control requires two AAA batteries (not provided).
The remote control contains the same buttons found on the product
itself, allowing all functions to be used up to a distance of 6 metres.
Point the remote control towards the front of the product.
10