Reversing the Door (cont.)
WArNiNg
w
• To avoid damage to the dryer or the door, support
the door with a stool or box that fits under the
door, or have an assistant support the weight of
the door.
• Always reverse the door BEFORE stacking the
dryer on top of the washer.
• Avoid dropping the door to avoid damage to the
door or the floor.
THE DRYER DOOR IS VERY LARGE AND HEAVY. Failure
to follow the instructions below can result in damage
to the dryer, property damage or injury to persons.
1. Move the door to the left side and line up the holes in
the hinge with the holes in the cabinet.
CAuTiON
Be sure to support the weight of the door before
removing the hinge screws.
2. Hold the hinge in place while inserting the two hinge
screws (to prevent the door from dropping).
Hinge Screw
3. Insert the latch on the right side and install the latch
screws.
4. Insert the two decorative screws on the right side.
5. Check that the door closes and latches properly.
Hinge hole
Latch
Screw
iNSTALLATiON iNSTruCTiONS
Decorative
Hinge
Screw
Swing Door
17