34
hOW TO uSE
HOW TO USE
Operating the Dryer
1
2
3
4
5
6
7
8
CLEAN THE LINT FILTER
If the lint fi lter has not already been cleaned, lift out the fi lter and remove
the lint from the last load. This will help ensure the fastest and most effi cient
drying performance.
Lint
Filter
LOAD THE DRYER
Load the dryer with the wet laundry from the washer. If the load is extra large,
you may need to divide it into smaller loads for proper performance and fabric
care.
TURN ON THE DRYER
Press the POWER button to turn ON the dryer. The cycle LEDs will illuminate
and a chime will sound.
SELECT A CYCLE
Turn the cycle selector knob in either direction until the LED for the desired
cycle is illuminated. The preset temperature, dry level, and option settings for
that cycle will display.
SELECT CYCLE MODIFIERS
Default settings for the selected cycle can now be changed, if desired.
NOTE
Not all options or modifi ers are available with all cycles. Temperature can
only be adjusted on Manual Dry cycles; Dry Level is only available on SENSOR
DRY cycles. A diff erent chime will sound and the LED will not illuminate if
the selection is not allowed.
SELECT CYCLE OPTIONS
Cycle options can be added using the option buttons.
NOTE
Not all options or modifi ers are available with all cycles. A diff erent chime
will sound and the LED will not come on if the selection is not allowed.
BEGIN CYCLE
Press the START/PAUSE button to begin the cycle. The cycle can be paused at
any time by opening the door or by pressing the START/PAUSE button. If the
cycle is not restarted within 60 minutes of being paused, the dryer will shut off
and the settings will be lost.
END OF CYCLE
When the cycle is fi nished, a chime will sound. Immediately remove your
clothing from the dryer to reduce wrinkling. If WRINKLE GUARD is selected,
the dryer will tumble briefl y every few minutes to help prevent wrinkles from
setting in the clothes.