Four Button Touch Control - SUNFEEL CS601BL Manual De Instrucciones

5.3 Four Button Touch Control*

ON/OFF Button
• ON&OFF: Starts the motor.
• Speed +: Increase the speed of the motor. Max: 3 speed.
• Speed -: Decrease the speed of the motor. Max: 1 speed.
• Lamp: Turns the lamp on. When the lamp is on, the dot segment is
viewed on the screen.
• Timer: If the lamp button is pressed for 3 seconds, the device starts
flashing in respective speed. After 15 minutes the device is turned off.
• Air Cleaning: When the air cleaning button is pressed on the
Remote Control, the function is initiated. The motor is operated for 10
minutes in 1 speed, then switches to standby for 50 minutes. While
this function is active, the screen segments start rotating. Then the
system shuts down automatically. The rotation is only for 24 hours.
• Filter Warning: At the end of 100 hours of operation, the 'C' warning
is viewed on the screen. This warning can be deleted by pressing the
speed - button for 5 seconds, the 'E' is viewed on the screen, the
warning is deleted and the timer is reset. This warning is viewed for 2
seconds when on/off button is pressed. During rotation changes this
warning is not displayed.
• Automatic Shutdown: For safety purposes, the circuit board of the
motor is programmed to provide maximum of 5 hours lighting and
maximum 10 hours of operation. When the air cleaning function is in
effect, the motor shutdown feature is turned off.
Plus Button Timer
11
Minus Button
Lamp