Screenless Touch Control - SUNFEEL CS601BL Manual De Instrucciones

GB

5.4. Screenless Touch Control *

1 2
1. Receiver
2. ON / OFF Button
3. Light
• ON&OFF Button: Starts the engine.
• Timer: To activate, press and hold the ON / OFF for 3 seconds.
Operating duration is 15 minutes at the adjusted cycle. The appliance
shuts down at the end of this duration. During the operation, the
activated engine LED flashes.
• Air Cleaning: To activate the function, press the air cleaning button
on the remote control. On cycle 1, the engine operates for 10
minutes and then stays on stand by mode for 50 minutes. This cycle
continues for 24 hours.
When this function is active, the engine ON / OFF button LED
flashes. Then the system automatically shuts down. The cycle runs
only for 24 hours.
• Light ON / OFF Button: Turns the light on and off. When the light is on,
the first LED is activated.
• Cycle Adjustment Button: It increases the cycle speed while the engine
is in operating state. If pressed when the cycle is on the top speed,
the engine goes back to cycle 1.
Cycle LEDS:
2nd LED: Activated when the engine operates at cycle 1.
3rd LED: Activated when the engine operates at cycle 2.
4th LED: Activated when the engine operates at cycle 3.
3 4
12
5
4. LED
5. Speed Adjustment Button
4 4 4