Hilti PD-C Manual Del Usuario página 22

WARNING
Warning: hazardous high-frequency or low-frequency electromag-
netic radiation! Electromagnetic radiation may cause spontaneous ac-
tivation/starting. The emission of radiation may cause interference to
other devices.
▶ Do not use the product in the proximity of persons who have a cardiac
pacemaker.
▶ Do not use the product in the proximity of medical instruments and
appliances.
▶ Operation of the product in the proximity of military installations,
airports, radio astronomy facilities or in aircraft is not permissible
unless prior permission has been obtained.
CAUTION
Visible and invisible laser radiation present hazards. Looking into
the laser beam causes eye damage.
▶ Secure the area in which you will be taking measurements. Take care
to avoid directing the laser beam toward other persons or toward
yourself when setting up the product.
▶ Do not look directly into the light source. In the event of direct eye
contact with the laser beam, close your eyes and move your head
out of the path of the laser beam.
▶ Keep laser tools out of reach of children.
CAUTION
Unintentional activation of the laser beam presents a hazard. The
laser beam may be switched on by inadvertently pressing a measure
command button or by a software error.
▶ Avoid unintentional activation of the laser beam.
▶ When handling the product, always bear in mind that the laser beam
could be switched on inadvertently. Before looking toward the path
of the laser beam, make sure that the laser beam is switched off or
that the product is switched off completely.
WARNING
Risk of explosion! Operation in the vicinity of flammable liquids, gases
or dusts is hazardous.
▶ Pay attention to the ambient conditions. Do not use the product
where there is a risk of fire or explosion.
18 English