Iso Ddin Radio Provision - Metra 99-7877 Manual Del Usuario

ISO DDIN radio provision

1. Cut and remove the center bar
from the radio housing. (Figure A)
2. Snap the ISO DDIN brackets to the
inside edge of the radio housing.
(Figure B)
3. Slide the radio into the bracket/
radio housing assembly and secure
using the screws supplied with the
radio. (Figure C)
4. Snap the ISO DDIN trim plate onto
the front of the radio/housing
assembly. (Figure C)
5. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Test the radio for proper
operation.
6. Reassemble the dash in reverse
order of disassembly.
Kit Assembly
(Figure A)
99-7877
(Figure B)
6
(Figure C)