Iso Din Radio Provision With Pocket - Metra 99-7877 Manual Del Usuario

ISO DIN radio provision with pocket

1. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
2. Secure the ISO brackets to the
radio with the screws supplied
with the radio. (Figure A)
3. Slide the radio into the radio opening
until the side clips engage. (Figure B)
4. Snap the ISO trim plate into the
radio housing. (Figure B)
5. Snap the pocket into the radio
housing. (Figure C)
6. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or AXXESS. Test the radio for
proper operation.
7. Reassemble the dash in reverse
order of disassembly.
Kit Assembly
(Figure A)
99-7877
(Figure B)
5
(Figure C)