Blackmagic Design HDLink Manual De Instalación Y Funcionamiento página 23

3D Stereoscopic Side by Side enabled
3D Stereoscopic Top and Bottom enabled
Why can't I set the SDI output format of HDLink Pro 3D to "Muxed 3D"?
"Frame Packing" is part of the current HDMI standard but is not part of the SDI standard.
Consequently the "Muxed 3D" option will be grayed out and unavailable if the 3D stereoscopic
output format of HDLink is set to "Frame Packing". If Frame Packing is used by an HDMI monitor
attached to HDLink Pro 3D, set the SDI output format of HDLink to either "Left Eye" or
"Right Eye".
Why are lookup tables being applied to the SDI output of HDLink Pro 3D?
When lookup tables are being used with an attached DVI/HDMI/DisplayPort monitor, they are
automatically applied to the SDI output when the dual stream 3D video setting is enabled.
3D Stereoscopic Line by Line enabled
The correct image
Troubleshooting 23