SENAO SN-358 SKYPE Manual De Instrucciones página 20

in microphone.
2. Paging the handset from the base:
Press the
Press any key on the handset except
3. Paging the handset from another handset:
This has to be done through the walkie-talkie mode. Please refer to the section.
Walkie-Talkie Between Handsets.
H. Walkie-Talkie between handsets:
1. Press the
2. The call in progress will be put on hold.
3. You may press and release the PTT key at any time to establish contact with a
separate handset.
4. You can press the
handsets.
5. The base unit can join the conversation with the 2 other handsets by pressing the
key. By pressing the
conference.
6. During the group conference, the multi-Talk indicator on the base unit will be turned
on.
I. Transferring calls:
During a call in progress, press the
followed by:
Either the unique ID number of the target handset to transfer the call on hold to
OR press BASE (left soft key) to place the call on hold and be transferred to the base
unit
OR press
J. Voice Volume:
Voice volume can only be adjusted DURING a call
There are 6 levels to voice volume
Use the up (
volume.
K. Changing Channel:
During a call in progress, you can press the
CHANNEL" key to change the radio channel to avoid radio interference.
Channel should be successfully changed with a sound of notification.
L. Last Ten Dialed Calls
To access the last 10 dialed numbers list; use the Up (
1. Scroll through the list using the scroll keys and press the
make the phone call.
2. OR press the SAVE (left soft key) to save the call.
key to establish the intercom.
key followed by the 2 digit unique handset ID to establish contact.
and then
key again cancels the group
key to transfer the phone call to any one of the handsets available.
) scroll keys to either increase or decrease the voice
) and down (
to answer page.
key to communicate to all of the other
OPTION
(Left Option Key) first, then select TRANSFER
( Left Soft Key) and then
OPTION
19
) and down ( ) scroll keys, then:
key to select and
"CHANGING