WARNING:
When servicing, use only identical replacement parts.
Use of any other parts can create a hazard or cause
product damage.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and can be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
Look for these accessories where you purchased this product or call 1-800-525-2579:
3 in. Foam Finishing Pad Set (3 pieces) .............................................................................................................A95DP101
3 in. Foam Correcting Pad Set (3 pieces) ...........................................................................................................A95DP102
3 in. Detail Polishing Pad Set (4 pieces) .............................................................................................................A95DP401
Detail Polishing & Sanding Set (8 pieces) ...........................................................................................................A95DP801
2 in. Detail Sanding Set (16 pieces) ..................................................................................................................A95DP1601
WARNING:
Current attachments and accessories available for use with this product are listed above. Do not use any attachments
or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not
recommended can result in serious personal injury.
MAINTENANCE
ACCESSORIES
NOTE: ILLUSTRATIONS BEGIN ON PAGE 11
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
REPLACING THE BACKER PAD
If the backer pad becomes damaged or worn, it can be
replaced.
Remove the battery pack.
Push the spindle lock down.
Rotate the pad until the backer pad is loosened and
releases from the base.
Attach the new backer pad by reversing these steps.
10 – English