Command And Control Equipment For Gas Burners Lme 73 - baltur TBML 80 MC Manual Instrucciones De Uso

COMMAND AND CONTROL EQUIPMENT FOR GAS BURNERS LME 73...

For more information, consult the machine quick Guide supplied with the manual.
!
Info
The lock reset push button
activate/deactivate the diagnostics functions.
↵
RED
The multicolour indicator light (LED) is the key element for visual diagnostics.
YELLOW
GREEN
The lock reset push button (EK) and the multicolour indicator light (LED) are both located on the control panel.
There are two diagnostics options:
1. Visual diagnostics: indication of the operating status or diagnostics of the lock cause
2. Diagnostics: display and operating unit through BCI up to AZL2 ...
) visual diagnostics:
1
during normal operation, the various operating statuses are indicated by colour codes according to the colour table below.
OPERATING STATUS INDICATIONS
During ignition, the following status indications are provided as per the table below:
Colour code table for the indicator light (LED)
Condition / status
Wait time (TW), other intermediate statuses
Ignition phase, controlled ignition
Correct operation, current strength of flame detector above the mini-
mum allowed
Incorrect operation, current strength of flame detector below the mini-
mum allowed
Decrease in power supply voltage
Burner in lock condition
Fault indication (see colour legend)
Extraneous light upon burner start-up
Interface diagnostics
Heat request
New program sheet
Legend
..... Fixed ON
) (info push button) (EK) is the key element to reset the burner control and
1
Off Red
0006081545_201305
Colour sequence
. . . . . . . . . . . . . . . .
. . . . . . . .. . . . . . . . . .
Yellow Green
16 / 34
Colours
OFF
Intermittent yellow
Green
Intermittent green
Alternating Yellow and Red
Red
Intermittent red
Alternating Green and Red
Quick flashing red
Yellow
Yellow - yellow - red