Record Keeping - RCBS EASY MELT 2 Instrucciones Del Producto

your feet and ankles completely. Protective clothing could include coveralls or one-piece
jumpsuits. However, the clothing should not be used for any other activities. It should be
laundered separately from other clothing. These precautions will minimize the likelihood of
any lead dust being scattered around in other living areas.
• Maintain good housekeeping practices to ensure that surfaces are as free as practical of the
accumulation of lead dust. Vacuuming is the preferred method. Compressed air should not
be used.
• Hands, face and hair should be washed after working around lead dust, fumes or fluxing
fumes, and prior to eating, drinking, smoking or applying cosmetics. The likelihood of lead
ingestion increases if you don't.
• At all times, keep small children well away from the casting area.
• Do not smoke, eat or handle food when handling lead.
• Always make certain bullet mould, lead dipper and bullet metal are totally free of moisture.
• All electrical melting pots should be grounded to reduce risk of electrical shock.
• Melting pots in use should never be left unattended.
• Be sure your melting pot and heat source are stable, and the table or bench is solid.
• An ingot mould or other suitable container should be placed under the nozzle to catch lead
that may leak.
• Never allow moisture near molten lead. If moisture is introduced to the molten lead, the
liquid will vaporize instantly generating a steam eruption causing lead to be sprayed
erratically, potentially causing injury to user.
• Never run furnace without lead in the pot.
• Do not attempt to move furnace when it is hot.

RECORD KEEPING

• Keep complete records of reloads. Apply a descriptive label to each box showing the date
produced, and the primer, powder and bullet used.
Since RCBS has no control over the choice of components, the manner in which they are
assembled, the use of this product, or the guns in which the resulting ammunition may be used,
no responsibility, either expressed or implied, is assumed for the use of ammunition reloaded
with this product.
INTRODUCTION
The new RCBS® EASY MELT™ ladle pot is a necessity for those who love to cast lead bullets with
a traditional ladle. The pot's 25-pound capacity is enough to cast hundreds of projectiles. The
programmable temperature control has a digital readout to ensure accuracy. A hinged cover
warms moulds while keeping out debris. The EASY MELT ladle pot is a traditional option for those
who love to manufacture bullets.
UNPACKING
Unpack the EASY MELT carefully and look for the items listed below.
• EASY MELT body and base
• AC power cord
Should any parts be missing, please notify your dealer immediately.
See "Parts Reference" on pg. 9
INSTALLATION
The EASY MELT is shipped pre-assembled and ready for use, no assembly is required.
6