Maintenance Work; Cleaning - Pfannenberg DTS Serie Manual De Instrucciones

ENG
6.4

Maintenance work

6.4.1

Cleaning

WARNING
Danger of accident and component damage
Danger of accident and component damage due to improper cleaning.
Cleaning the cooling units using water jets, steam jet cleaners or high-pressure cleaners or sharp objects may damage the
electrical and electronic components. Malfunctions may cause accidents.
•
Do not clean with a water jet, high-pressure cleaner or flammable cleaning agents.
•
Protect electrical components against moisture penetration.
•
Do not use pointed or sharp-edged objects when cleaning the blades. They must not be compressed or damaged.
The frequency of cleaning intervals depends on the respective operating conditions. Perform the following cleaning operations
regularly to ensure safe and reliable operation of the cooling units:
•
Clean the heat exchangers of dust or ambient residues.
•
Regularly check the condensate drain.
Operating Manual | Attachment and Installation Cooling Units | Standard Controller (SC) – 230 V | 086100005e
46/58