Publicidad
Idiomas disponibles
Idiomas disponibles
Before using this 4 channel digital video recorder, read this
instruction manual in order to avoid any malfunctions. Save this
instruction manual for future reference.
IMPORTANT
•
This device should be placed in an area with adequate
•
ventilation.
•
Do not expose this device to direct sunlight, dust, or humidity.
•
Always use a soft and dry cloth in order to clean this device.
•
If the power cord is damaged it must be replaced immediately by
the manufacturer, your service agent, or any qualifies personnel.
CONTROLS
FRONT PANEL
1 2 3 4 5 6 7
1.- CH1: Allows you
to select the
camera connected
to channel 1
20
2.- CH2: Allows
you to select
19
the camera
connected to
18
channel 2
17
3.- CH3: Allows
you to select the
camera connected to
channel 3
4.- CH4: Allows you to select the camera connected to channel 4
5.- Quad: Allows you to view all four cameras at the same time on one
screen.
6.- HDD. light on when the Hdd is in use.
7.- Power indicator: light on when the device is in use
8.- Up: Allows you to move through the menu options up
9.- Sel/edit: Allows you to confirm or change a selection
10.- Down: Allows you to move through the menu options down
11.- Security lock
12.- Menú: Accesses the main menu
13.- IR sensor: Receives the infrared signal from the remote control.
14.- Rec: Begins to recording.
15.- Stop: In playback mode, allows you to stop the current playback.
In recording mode, stops the current recording.
16.- Removable rack
17.- Play: Begins the playback of a saved file.
18.- Fordward: In playback mode, allows you to skip forward to a
specific point in the video.
19.- Pause
20.- Return : In playback mode, allows you to return to a specific point
of the video.
REAR
1
PANEL
1.- Video output.
Allow you to
connect a monitor
through a BCN
connector.
2.- CH1: Allows
you to view
the camera 1
3.- CH2: Allows you
to view the camera 2
4.- CH3: Allows you to view the camera 3
��NGLISH-01
8
14
16
15
13
12
2
3
4
5
8
5.- CH4: Allows you to view the camera 4
6.- Power input
7.- USB port. You can playback a record in the computer.
8.- Ground system.
REMOTE CONTROL
1.- CH1: Allows you to view the camera 1
2.- CH2: Allows you to view the camera 2
3.- CH3: Allows you to view the camera 3
4.- CH4: Allows you to view the camera 4
5.- Play: Begins / restarts the playback
of a saved file.
6.- Forward: In playback mode,
allows you to skip forward to a
specific point in the video.
7.- Stop: Stops current playback or
current recording.
8.- Up: Allows you to move
through the menu options up
9.- Down: Allows you to move
through the menu options down
10.- Select: Allows you to confirm or change a selection
11.- Menu: enter to the main menu
12.- Pause: In playback mode, allows you to pause a video being
played.
13.- Record: Begins recording.
14.- Rew: In playback mode, allows you to return to a specific point
9
from the video.
15.- Quad: Allows you to view all 4 cameras on the same screen at
10
the same time.
HARD DRIVE INSTALLATION (not
11
Make sure taht you have to kown the computers. if not go with a
qualified person.
1.- Pull to the front the
removable rack.
2.- Connect the ID�� cable
Connect the ID�� cable
to your hard disk making
sure that the tab located in
the middle of the cable
matches with the slot on
the hard disk.
3.- Connect the power
Connect the power
cable to your hard disk.
4.- Place the hard disk inside
Place the hard disk inside
the recorder
5.- If you want to protect the hard
disk, use the keys to close the
removable rack
al lea este instructivo para
We recommend using the HDD
evitar cualquier mal funcio-
in Slave or Cable Select mode
so make sure jumper on the
namiento. Guárdelo para
hard disk are is in Slave mode or
futuras referencias.
cable select mode
6
7
3 4
1 2
15
14
13
12
11
10
included)
��NGLISH-02
5
6
7
8
9
Publicidad
