How To Add Cameras Manually - Urmet 1093 Guía Rápida De Configuración

Now go back to the NVR channel list and press "Refresh" again to display the updated state icon of the modified
channels.
4.2

HOW TO ADD CAMERAS MANUALLY

This paragraph illustrates a procedure alternative to the one shown in the paragraph above (4.1).
Go to the Internet Explorer of the NVR (default password: 00000000) and then open [Remote Setting→ Display → IP
Camera] page and press "Quick Add" as shown below:
Wait for a few seconds. The page will automatically list all the IP cameras detected on the network by the NVR:
DS1093-155A 34