** There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED
SPEED LED
LAN Port
Activity / Link LED
Status
Off
Blinking
On
*** If you use a 2-channel speaker, please connect the speaker's plug into "Front Speaker Jack". See the table below
for connection details in accordance with the type of speaker you use.
Audio Output
Channels
2
4
6
8
To enable Multi-Streaming, you need to connect a front panel audio cable to the front
panel audio header. After restarting your computer, you will find the "Mixer" tool on your
system. Please select "Mixer ToolBox"
click "ok". Choose "2CH", "4CH", "6CH", or "8CH" and then you are allowed to select
"Realtek HDA Primary output" to use the Rear Speaker, Central/Bass, and Front Speaker,
or select "Realtek HDA Audio 2nd output" to use the front panel audio.
**** ACPI wake-up function is not supported on USB_3_4 ports.
4
Description
No Link
Data Activity
Link
Front Speaker
Rear Speaker
(No. 8)
(No. 6)
V
V
V
V
Speed LED
Status
Description
Orange
100Mbps/1Gbps/2.5Gbps
/5Gbps connection
Green
10Gbps connection
Central / Bass
(No. 5)
--
--
V
--
V
V
V
V
, click "Enable playback multi-streaming", and
Line In
(No. 7)
--
--
--
V