Bushnell 119598 Manual De Instrucciones página 21

The SETUP Menu – Parameters and Settings List
w/Descriptions
Parameter
Mode
Image Size
(only affects
still photos in
Camera mode)
Image Format
(only affects still
photos-format
for video is tied
to Video Size)
Capture
Number
(only affects
still photos in
Camera mode)
* Only still photos can be transmitted wirelessly, due to the large files generated by video
and carrier bandwidth limitations. Only the first frame of a video will be sent wirelessly.
When the camera is set to video mode, the video files are stored on the SD card for later
review (see
REVIEWING/DELETING THE PHOTOS/VIDEOS
Settings
(Bold=default)
Camera, Video*
3M Pixel,
5M Pixel,
8M Pixel
Full Screen 4:3,
Wide Screen16:9
1 (photo),
2 (photos),
3 (photos)
Description
Selects whether still photos or video
clips are captured when the camera
is triggered.
Selects resolution for still photos
from 3 to 8 megapixels. Higher
resolution produces better quality
photos, but creates larger files
that take up more of the SD card
capacity (fills up faster). 5M is a good
compromise between quality and
file size.
Selects 4:3 (Fullscreen, like older TV
sets) or 16:9 (Widescreen, like new
flat TVs) "aspect ratio" for still photos.
Selects how many photos are
taken in sequence per trigger in
Camera mode. This setting affects
photos taken in Field Scan mode
as well (to snap two photos every
10 minutes, for example). Note:
only one thumbnail image will be
transmitted wirelessly, regardless of
this setting. Field Scan images are
not transmitted. Please also refer to
the Interval parameter.
, pg.36)
21