Bushnell 119598 Manual De Instrucciones página 33

USING THE SETUP MENU INPUT SCREENS
Camera Name Input
After selecting the Camera Name parameter (the only setting is "Input"), press
OK. If necessary, delete the previous or default name by pressing the RIGHT
key until the backspace symbol (
highlighted, then keep pressing OK. Select (highlight) each alphanumeric
character you want, using the LEFT/RIGHT and UP/DOWN keys, and pressing
OK after each one to set it. When finished naming the camera, press MENU to
save the name to memory.
Coordinate Input
After selecting the Coordinate Input parameter, press UP or DOWN to select
the ON setting and press OK. The latitude and longitude for any location
where you plan to place the camera can be obtained at many websites,
for example: http://itouchmap.com/latlong.html. You can enter a nearby
street address, just zip code, or use the various types of maps to locate the
approximate position. The format you will need to use to enter the coordinates
in the WIRELESS Trophy Cam HD menu screen is shown below:
Latitude
Longitude
Note: You may see "negative" latitude or longitude coordinates online. These
designate South latitudes and West longitudes.
Degrees
Latitude
N=North,
(3 digits)
S=South
(La) N000,00'00"
(Lo) W000,00'00"
Degrees
W=West,
Longitude
E=East
(3 digits)
) (located between letters "M" & "N") is
Minutes Seconds
Minutes Seconds
33