Tabla De Contenido; Safety Instructions; Introduction To Symbols; Introduction - SOMFY ROLLIXO RTS Manual De Instalación

Rollixo RTS
Translated version of the guide
CONTENTS
1 - Safety instructions ______________________________ 1
1.1 Introduction to symbols
1.2 Introduction
1.3 Caution - Important safety instructions
1.4 Preliminary checks
1.5 Electrical pre-equipment
1.6 Safety instructions relating to installation
1.7 Regulations
1.8 Assistance
1.9 Risk prevention
2 - Description of the Rollixo receiver _________________ 4
2.1 Area of application
2.2 Description of the receiver
2.3 Description of the external programming interface
2.4 Space requirements
2.5 Standard installation diagram
3 - Installation ____________________________________ 5
3.1 Mounting the Rollixo receiver
3.2 Motor and fall protection wiring
3.3 Connecting the receiver to the mains power supply
3.4 Checking the direction of rotation of the motor and adjustment of the
motor end limits
4 - Installing an optical radio safety edge or resistive safety
edge with XSE transmitter ________________________ 6
4.1 Installing the optical radio or resistive safety edge and its XSE
transmitter
4.2 Installing a base magnet on the door runner
4.3 Programming the XSE transmitter
4.4 Recognition of the lower magnet
5 - Checking operation of the receiver ________________ 7
5.1 Operation in sequential mode
5.2 Integrated lighting
5.3 Orange light
5.4 Cells
5.5 Safety edge
5.6 Alarm (optional)
6 - User training ___________________________________ 8
7 - Connecting additional devices ____________________ 8
7.1 General wiring diagram
7.2 Parameter setting for wiring options
7.3 Description of the various additional devices
8 - Advanced parameter setting _____________________ 10
8.1 Different operating modes
8.2 Programming operating modes
8.3 Holiday mode
9 - Storing the remote controls _____________________ 11
9.1 Memorising 2 or 4-button remote controls
9.2 Memorising 3-button remote controls
9.3 Memorising by copying a previously memorised remote control
10 - Memorising an XSE safety edge transmitter _______ 12
11 - Clearing the remote controls ____________________ 12
11.1 Clearing a remote control
11.2 Clearing all remote controls
12 - Deleting a safety edge transmitter _______________ 12
13 - Locking/unlocking the programming buttons ______ 12
14 - Diagnostics __________________________________ 12
14.1 Receiver
14.2 XSE transmitter
15 - Technical data ________________________________ 14
Copyright © 2014 SOMFY ACTIVITES SA. All rights reserved.

1 - SAFETY INSTRUCTIONS

1.1 Introduction to symbols

This symbol indicates a danger, the different
1
degrees of which are described below.
1
2
2
2
Indicates a danger which may result in immediate death
2
3
or serious injury
3
3
Indicates a danger which may result in death or serious
4
4 injury
4
4
4
Indicates a danger which may result in minor or moderate
injury
5
5
5
Indicates a danger which may result in damage to or
6
destruction of the product

1.2 Introduction

6
> Important information
6
7
This product is a receiver for vertically opening roller garage
7
doors for residential use. To ensure compliance with the
standard EN 60335-2-95, this product must be installed
7
with a Somfy RDO CSI motor and a Somfy safety edge
7
solution. The assembly is together designated as a "drive".
7
This drive is exclusively intended to equip a garage door
7
7 designed for residential use.
7
The main purpose of these instructions is to satisfy the
requirements of the aforementioned standard and to ensure
the safety of equipment and persons.
8
8
8
described in this manual is prohibited (see "Field of
10
application" paragraph in the installation manual).
10
11
The use of any accessory or any component not
recommended by Somfy is prohibited, on safety grounds.
11
Somfy cannot be held liable for any damage resulting from
11
failure to follow the instructions in this
11
manual.
In case of any doubts when installing the drive, or to obtain
additional information, consult the website www.somfy.com.
12
12
change to the standards or to the drive.
12
14
DANGER
WARNING
PRECAUTION
ATTENTION
WARNING
1