Step 5: Installing The Monitor On The Wall - Sony BRAVIA FW-85BZ35F Guia Del Usuario

3
Detach the Table-Top Stand from the
Monitor.
FW-85BZ35F
FW-75BZ35F
Step 5: Installing the Monitor on the
wall
WARNING
Be sure to complete the installation before
connecting the AC power cord to the wall outlet.
If you allow the AC power cord to be pinched
under or between pieces of equipment, this may
result in a short circuit or an electric shock.
Be careful not to stumble over the AC power cord
or the Monitor, as you may hurt yourself.
1
Connect the AC power cord and the
connecting cable(s) supplied with the
Monitor to the Monitor.
Connect the AC power cord and the
connecting cable(s) to the connectors on the
rear of the Monitor. For details on
connecting the AC power cord and the
connecting cable(s), refer to the instruction
manual of the Monitor.
Note
• You cannot connect the cables to the Monitor
after installing it on the Base Bracket.
• Subcontract the cable routing in the wall to a
licensed contractor.
2
Install the Monitor onto the Base
Bracket.
1 Referring to the Screw and Hook
locations diagram/table on page 17,
determine the holes of the Base Bracket
for latching the upper hooks of the
Mounting Hook.
2 Hold the Monitor securely with both
hands, and gently align it on the wall.
WARNING
Two or more people (three or more people
for FW-85BZ35F) are needed to transport a
large Monitor.
FW-85BZ35F
GB
13
GB