Getting Started - Panacom MP-1124 Manual De Usuario

GETTING STARTED

First call
1> Insert the SIM cards (switch off the phone at first). For
detailed installation guide, please refer to "Installing the SIM
card".
2> Charge the battery. Refer to "Battery and charging".
3> Press and hold the Power key to switch on the mobile
phone.
4> Enter area code and telephone number in the dial interface
and then press the call key to dial out by SIM1 or SIM2 .
Note: Before using the mobile phone, please insert valid SIM
cards and charge the battery.
Installing SIM cards
When you register mobile phone, you can apply for two
different telephone numbers and two SIM cards (Subscriber
Identity Module). With the two cards, you can use the functions
of the mobile phone. The SIM card saves the parameters
required by the communication, and personal information,
including PIN code (personal identity number), contacts, short
messages and other system services.
Warning: Do not bend or scratch the SIM card, or contact
static, dust or water; if the SIM card is lost, please contact your
network operator. Please switch off the mobile phone before
installing the SIM card. The SIM card is inserted into the rear
side of the mobile phone.
Note: The SD card is tiny. Please keep it away from children
to avoid swallowed. If the SIM card is invalid or damaged,
the phone displays "Insert SIM card". Switch off the phone
and take out the SIM card, and then re-insert it into the slot
properly. If the SIM card is damaged, please contact your
network operator. If the SIM card is locked, please contact your
network operator.
Pg. 6
Inst
Sinc
need
To in
inser
on th
To re
card
Note
selec
Trans
purc
Bat
Insta
Only
isn't
Note
dam
Char
The
com
Plea
disch
from
char
right
the b
Batte
Your
1> Y