Steren TEL-2470 Manual De Instrucciones página 44

c) BS SETTINGS
Use this option to set the wireless base (the base is the corded phone). In case the
headset is unregistered, you cannot make any change.
- Delete HS: This option let you delete a headset from the base in use. When
select it with the "MENU" key, the headset will ask you your PIN number (the
predetermined number is 0000 (four zeros)). The next step is select the
identification number of the headset you want to delete.
- Flash Time: With this option, the user may change the flash time. You can choose
between 100, 300 y 600 ms.
- Pause: This option let you select the pause time used while you dial from a
switchboard. The options are 1.5 y 3.6 sec.
- Modify PIN: With this option you can change the PIN, that it is used to set some
parameters.
Press "MENU" to enter, in the screen will display PIN?, type the current PIN
(predetermined number is 0000). Press "MENU" to confirm the option. In the
screen will be displayed NEW PIN, type the new one. Press "MENU" to confirm.
Repeat the number, finally press "MENU" to store the changes.
- BS Default: This option will allows you to reset the phone to default parameters.
All settings made by the user will be deleted. Once you have entered to the menu,
the word PIN? Will display in the screen, please type 0000 (or the current ID
number), press "MENU" to confirm.
d) HS SETTINGS
With this option you can set parameters in the headset, in the submenu you will see
next options:
15