Cooper Lighting Regent MDL Serie Manual De Instrucciones página 7

Mode of
operation:
4 Hour
NIGHT TIME ON then
Motion Activated
Lantern should turn on
automatically at night 100%
brightness for 4 hours, then
reset to regular auto motion
setting for the remainder
of the evening.
6 Hour 6 Hour
NIGHT TIME ON then NIGHT TIME ON then
Motion Activated Motion Activated
Lantern should turn on Lantern should turn on
automatically at night 100% automatically at night 100%
brightness for 6 hours, then brightness for 6 hours, then
reset to regular auto motion reset to regular auto motion
setting for the remainder setting for the remainder
of the evening. of the evening.
Dusk to Dawn Setting
Override Mode
(activated only at night)
Lantern should stay on 100%
brightness from dusk to dawn
and then reset to the AUTO
or NIGHT TIME ON
setting next dawn.
Continuous Override Mode
(standard
floodlight setting)
Lantern should stay on
continuously both day and night
(must be reset manually).
Return to Auto
or NIGHT TIME ON settings
(motion activated)
From any of the
above settings.
Set slide switch
on sensor to:
NIGHT TIME ON
4 HR
(4 Hours)
Note: Once the lantern has
come on in the selected "Night
Time On" mode, you cannot
change the mode setting until
the next dawn. The lantern will
operate in the first "Night Time
On" mode selected
(2 hour, 4 hour, or 6 hour),
even if changed.
NIGHT TIME ON NIGHT TIME ON
6 HR 6 HR
(6 Hours) (6 Hours)
Note: Once the lantern has Note: Once the lantern has
come on in the selected "Night come on in the selected "Night
Time On " mode, you cannot Time On " mode, you cannot
change the mode setting until change the mode setting until
the next dawn. The lantern will the next dawn. The lantern will
operate in the first "Night Time operate in the first "Night Time
On" mode selected (2 hour, 4 On" mode selected (2 hour, 4
hour, or 6 hour), even if changed. hour, or 6 hour), even if changed.
AUTO 4 MIN
or
AUTO 12 MIN
or
ALL NIGHT TIME ON MODES
TEST
AUTO 4 MIN
or
AUTO 12 MIN
or
ALL NIGHT TIME ON MODES
7
How to set
power switch:
Keep the power to the
fixture on.
Keep the power to Keep the power to
the fixture on. the fixture on.
Turn the power "OFF"
for 5 seconds then
back "ON."
Turn the power "OFF"
for 5 seconds then
back "ON."
Turn the power "OFF"
for at least 90 sec., then
back "ON".