Cleaning Programs; Setting The Advance Speed; Connecting To The Power Supply - Windsor Saber Compact 16 Manual De Instrucciones

Cleaning programs

3
2
1
1 OFF
2 Scrubbing/vacuuming operation Wet cle-
aning of floor and vacuuming of dirty wa-
ter.
3 Wet scrubbing Wet cleaning of floor, al-
lowing detergent to take effect.
4 Vacuuming up dirty fluid.
5 Polishing the floor without applying li-
quid.
Setting the squeegee
Oblique position
To improve the vacuuming result on tiled
floors the squeegee tool can be turned to an
oblique position of up to 5°.
Release the wing nuts.
Turn the squeegee tool.
Tighten the wing nuts.
Angle
If the vacuum result is unsatisfactory the
angle of the straight squeegee tool can be
modified.
Release the wing nuts.
4
5
Tilt the squeegee tool.
Tighten the wing nuts.

Setting the advance speed

Turn the running gear to the front with
your foot.
Reducing the speed: Turn the wheel in –
direction.
Increasing the speed: Turn the wheel in
+ direction.

Connecting to the power supply

Insert the looped end of the extension
cable in the strain relief hook.
Plug in the mains plug.
9
English