Ega Master ROSCAMATIC Manual De Instrucciones página 5

Ocultar thumbs Ver también para ROSCAMATIC:
Tabla de contenido

Publicidad

podría deformar el tubo.
F) ESCARIADO
F1.- Retirar tanto la terraja
como el cortatubos a la
posición de reposo o abatida.
F2.- Abatir el escariador a la
posición de trabajo hasta que
éste descanse en el carro.
F3.- Avanzar hacia el tubo e
inmovilizarla en sentido de giro
mediante el enclavamiento que
dispone el cuerpo del
escariador.
F4.- Avanzar el carro hasta que
el escariador haga contacto
con el tubo, presionándolo
hasta que se haya producido el
biselado necesario.
MANTENIMIENTO
G) ENGRASE
G1.- Asegúrese de que el
aceite discurre libremente y
que las líneas de conducción
no ofrecen obturaciones.
G2.- Cuide de que el depósito
contenga suficiente aceite para
que el filtro de aspiración se
encuentre en todo momento
sumergido y no aspire aire.
G3.- Si el aceite pierde color y /
o se contamina, limpie el
depósito y cámbielo.
G4.- Limpie con frecuencia el
depósito para que no existan
impurezas que obturen el filtro
de aspiración.
G5.- Mantenga limpio el filtro
de aspiración para que realice
un correcto aspirado.
G6.- Esta máquina adopta un
aceite especial de corte y
refrigerador ¡pídanos!.
F3.- Feed the reamer into the
pipe and lock it by the reamer
interlock.
F4.- Move the carriage until the
reamer makes contact to the
pipe, pressing it until the belbel
is completed.
MAINTENANCE
G) LUBRICATION
G1.- Be sure oil flows freely
and oil lines are free from
obstructions
.
G2.- Be sure there is enough oil
in the tank so that the strainer
is allways submerged and it
doesn't intake air.
G3.- If oil becomes discolored
or contaminated, clean the tank
and refill with fresh cutting oil.
G4.- Clean the tank frequently
so that the scraps don't bung
up the strainer.
G5.- Keep the strainer clean to
ensure a proper aspiration.
G6.- This machine adopts a
special oil as cooling agent for
threading. Ask us for it.
G7.- If the oil system is kept
clean, this will prolong the
working like of the gear-pump.
H) REAMER
H1.- Keep cutting in good
condition and replace it when
damaged.
- 5 -

Publicidad

Tabla de contenido
loading

Tabla de contenido