Publicidad
Idiomas disponibles
Idiomas disponibles
®
IMPORTANT SAFETY INSTRUCTIONS
GROUNDING
PIN
GROUNDED
OUTLET
GROUNDED
OUTLET BOX
No children
Figure 2
Grounding methods
RISK OF FIRE OR INJURY - ELECTRIC SHOCK
1. Always unplug this furnishing from the electrical outlet before cleaning or removing components.
2. Improper connections of the equipment-grounding conductor can result in risk of electric shock. Check with a
qualified electrician if you are in doubt as to whether the product is properly grounded. Do not modify the plug
provided with the product - If it will not fit the outlet, have a proper outlet installed by a qualified electrician. This
product is for use on a nominal 120-V circuit and has a grounding plug that looks like the plug illustrated in figure 2.
Make sure that the product is connected to an outlet having the same configurations as the plug.
No adapter should be used with this product.
RISK OF INJURY - BURNS, FIRE, ELECTRIC SHOCK, CRUSHING
1. Do not allow use by or near children or others who do not understand how to use product safely.
2. Use extra care and unplug power when installing components and routing cables inside monitor cabinet.
Follow all noted cable routing instructions and use cable management components provided to contain and
protect all cabling from damage from moving parts. Use additional cable retaining hardware, as needed, to
ensure that an orderly and safe condition is maintained inside the monitor cabinet.
3. Use only indoors in dry conditions, do not allow liquids to come in contact with the product operating system.
4. Use this table only for its intended use as described in these instructions. Do not use attachments not
recommended by manufacturer.
5. Maximum Table Load = 125 lbs (56.7 kg). Max Monitor Weight = 40 lbs (18.1 kg).
6. This product must be installed in accordance with all applicable state and local codes and ordinances.
Only connect this product to standard electrical power supply of 120VAC-60Hz, 1440 watts.
7. Never operate this table if it has a damaged cord or plug, if it is not working properly, if it has been dropped or
damaged.
8. Confirm appropriate critical components and accessories (identified on page 1) are being used.
DANGER
WARNING
2 of 66
P/N 1094808001
Doc # 94775 Rev D
Publicidad
