Publicidad
3.
Drill pilot holes.
IMPORTANT: Pilot holes must be drilled to a depth of 63.5 mm (2½ in.), using a 5.5 mm (7/32 in.) diameter drill bit.
02
4.
Tighten the lag bolts
CAUTION:
Improper use could reduce the holding power of the lag bolt. DO NOT over-tighten the lag bolts.
3
only until they are pulled firmly against the wall plate
63.5 mm
(2½ in.)
5.5 mm
(7/32 in.)
01
.
4
01
02
9
Publicidad
