BGS technic DT-8836M Manual Del Usuario página 14

Termómetro de frente infrarrojo / sin contacto
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

f). Save data
The test data are saved automatically. You can check the history results by pressing
 and .
G). Change the battery
If the LCD display indicates a status that is too low, the battery
must be changed.
Work step:
1. Open the battery compartment and take out the old battery.
2. If the thermometer is not being used for a longer period, take out the battery.
When inserting the battery, observe the pole direction otherwise the device may be
damaged. Rechargeable batteries are not permissible for this device.
3. Service life of the device
approx. 40,000 tests
4. Protection category against electric shock: type BF
12. Warning
- The glass on the screen is highly sensitive and fragile.
Please be careful when using it.
- Do not use any rechargeable batteries.
- Do not hold it under too much sunlight and keep it away from water.
13. In this way, you will keep the device in a good state, and
clean
- The most important part is the scanner head. Please protect this particularly.
- Clean the surface with 70% alcohol cotton wool.
- Otherwise, keep the thermometer away from all fluids.
- Keep the device in a dry location and avoid dust and contamination or sunlight.

Publicidad

Tabla de contenido
loading

Productos relacionados para BGS technic DT-8836M

Este manual también es adecuado para:

6006

Tabla de contenido