CAMPAGNOLA SUPER STAR SF Manual De Utilización Y Mantenimiento página 16

The tool do not have enough cutting power
Make sure the air supply hose is clean.
Check the pressure in the compressor unit.
Make sure the blade (15) pivot pin is not too tight.
Air leaks
Replace the seals even if only slightly damaged
1) With the automatic safety catch (7) on: check the seal (22).
2) With the safety catch off: check the seals (22, 23, 24, 25, 26).
3) With the safety catch off and the control lever pressed: check the seals (25, 26, 27).
Light-alloy extensions are available in various lengths (from 0.5 to 2.5 m). Telescopic ex-
tensions are also available in three different sizes (0.7÷1.2 m, 1.1÷2 m, 1.7÷2.8 m).
To connect the extension:
• Remove the guard (5), the control lever (6) and the valve assembly (13).
• Remove the seal (19).
• Put on the fitting (28) and then fully tighten the extension (29).
• The tools and machines are guaranteed for 1 or
product, starting from their purchase date indicated in
document with legal value.
• The warranty is to be considered valid only if the installation and use of the compressor
and/or tools have been carried out according to the instructions indicated in the Use and
Maintenance Manual or to instructions written by the Authorized Service Point person-
nel (Service program).
• Originally faulty parts will be repaired or replaced free of charge.
• The purchaser shall pay for the labour and transport costs.
• All the parts subject to wear (belts, filters, blades, seals, etc.) are not subject to the warranty.
• The eventual costs of intervention (inspections, disassembling and assembling
operations), caused by wrong working which was not due to manufacture faults, are not
included in the warranty.
• Replacements or repairs of faulty equipment, when warranty is claimed by the users, can
only be authorized by accredited Service Points personnel and their decision is final.
• The Company shall not be held responsible for any injury or damage caused to people,
animals or things, due to improper use or maintenance of the compressor and/or tools.
The warranty is limited to the manufacture defects.
• The warranty is lost in case of tampering and /or even small changes and in case of use
of non-original spare parts.
• In any case the replacement of the tool is excluded.
WARNING: For warranty claims, according to the above mentioned points, it
is necessary to enclose the properly filled-in warranty card and the corre-
sponding purchase proof with date of purchase (invoice or any other docu-
ment with legal value).
ACCESSORIES
WARRANTY
13 - 40