Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Thank you for choosing Chevrolet Performance as your high performance source. Chevrolet Performance is committed
to providing proven, innovative performance technology that is truly.... more than just power. Chevrolet Performance parts
are engineered, developed and tested to exceed your expectations for fit and function. Please refer to our catalog for the
Chevrolet Performance Authorized Center nearest you or visit our website at www.chevroletperformance.com.
It is not the intent of these specifications to replace the comprehensive and detailed service practices explained in the GM
service manuals. For detailed installation instructions please look to the service manual for you specific vehicle.
GM service manuals are available from:
Helm Incorporated
PO Box 07130
Detroit, MI 48207
For information about warranty coverage, please contact your local Chevrolet Performance parts dealer.
Observe all safety precautions and warnings in the service manuals when installing this kit in any vehicle. Wear eye
protection and appropriate protective clothing. Support the vehicle securely with jack stands when working under or around
it. Use only the proper tools. Exercise extreme caution when working with flammable, corrosive, and hazardous liquids and
materials. Some procedures require special equipment and skills. If you do not have the appropriate training, expertise, and
tools to perform any part of this conversion safely, this work should be done by a professional.
The information contained in this publication is presented without any warranty. All the risk for its use is entirely assumed
by the user. Specific component design, mechanical procedures, and the qualifications of individual readers are beyond the
control of the publisher, and therefore the publisher disclaims all liability incurred in connection with the use of the information
provided in this publication.
Chevrolet, Chevy, the Chevrolet Bow Tie Emblem, General Motors, and GM are all registered trademarks of the General
Motors Corporation.
Kit Contents:
Part
Performance Emblem
Installation Instructions
Front Coil Spring
Rear Coil Spring
Strut Mount Bolt
Shock Absorber Bolt
Lower Control Arm Bolt
Suspension Lowering Kit
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
Malibu Suspension Lowering Kit
SUSPENSION REMOVAL & INSTALLATION INSTRUCTIONS
Qty
1
1
2
2
8
2
2
IR 19NO15
19NO15
23393265
PART NO.
DATE
Initial Release - Daniel Parrino
1
SHEET
REVISION
36
OF
AUTH
2204871

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Performance 23393265

  • Página 1 Thank you for choosing Chevrolet Performance as your high performance source. Chevrolet Performance is committed to providing proven, innovative performance technology that is truly..more than just power. Chevrolet Performance parts are engineered, developed and tested to exceed your expectations for fit and function. Please refer to our catalog for the Chevrolet Performance Authorized Center nearest you or visit our website at www.chevroletperformance.com.
  • Página 2 If such contact occurs, vehicle damage or unsatisfactory vehicle performance may result. Before you begin any lifting procedure, be sure the vehicle is on a clean, hard, level surface. Be sure all the lifting equipment meets weight standards and is in good working order.
  • Página 3 Part 2: Strut Assembly Removal: 1. Remove the front tire and wheel assembly. 2. Front Wheel Speed Sensor Wiring Harness (1) @ Steering Knuckle » Separate 3. Front Brake Hose (2) @ Strut Assembly » Separate 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 4 4. Front Stabilizer Shaft Link (1) @ Strut Assembly » Separate 5. Steering Knuckle Nut (1) » Remove [2x] 6. Steering Knuckle Bolt (2) » Remove [2x] 7. Front Suspension Strut Mount Bolt (1) » Remove [4x] DISCARD the bolts. 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 5 CH-49375 Strut Spring Wrench Front Suspension Strut Mount Front Coil Spring Upper Insulator Front Coil Spring Front Suspension Strut Bumper Front Strut Boot Front Coil Spring Lower Insulator Front Suspension Strut 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO. SHEET DATE REVISION...
  • Página 6 Failure to replace the torque-to-yield or single use fastener could cause damage to the vehicle or component. 3. Front Suspension Strut Mount Bolt (1) » Install, but do NOT tighten [4x] Install NEW bolts. 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 7 7. Front Brake Hose (2) @ Strut Assembly » Install 8. Front Wheel Speed Sensor Wiring Harness (1) @ Steering Knuckle » Install 9. Install the front tire and wheel assembly. 10. Lower the vehicle completely. 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 8 3. Rear Stabilizer Shaft Link Bolt (2) » Remove 4. Rear Shock Absorber Nut (1) » Remove 5. Rear Shock Absorber Bolt (2) » Remove DISCARD the bolt. 6. Support the lower control arm. 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 9 9. Lower the rear suspension lower control arm (1) to provide clearance for the rear coil spring. 10. Rear Coil Spring (1) » Remove 11. Rear Coil Spring Lower Insulator (2) » Remove 12. Rear Coil Spring Insulator (3) » Remove 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 10 5. Rear Suspension Lower Control Arm Bolt (2) » Install Install a NEW bolt. 6. Rear Suspension Lower Control Arm Nut (1) » Install Tighten 1. First Pass: 160 Nm (118 lb ft) 2. Final Pass: (90–105 degrees) 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO. SHEET...
  • Página 11 10. Rear Stabilizer Shaft Link Nut (1) » Install Tighten 58 Nm (43 lb ft) 11. Remove the support from the rear suspension lower control arm. 12. Install the rear tire and wheel assembly. 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 12 0.1° ± 0.2° 0.0° ± 0.8° 0.8° Rear — — — — — 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO. SHEET DATE REVISION AUTH ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11 WHITE 16 POUND BOND PAPER.
  • Página 13: Contenu De La Trousse

    à offrir une technologie de rendement éprouvée et novatrice qui est réellement..beaucoup plus que de la puissance. Les pièces de Chevrolet Performance ont été conçues, élaborées et mises à l'essai de manière à dépasser vos attentes de réglage précis et de fonction. Veuillez vous reporter à notre catalogue pour connaître le centre Chevrolet Performance autorisé...
  • Página 14 Il peut être nécessaire de mettre un véhicule avec le groupe effet de sol (Ground Effect) sur des rampes basses pour permettre au bras de levage d'entrer sous le véhicule et de laisser le dégagement nécessaire aux moulures de bas de caisse. 23393265 Suspension Lowering Kit...
  • Página 15: Dimensions Minimales De La Rampe

    1. Déposer l'ensemble roue et pneu avant. 2. Faisceau de câbles de capteur de vitesse de rotation de roue (1) à porte-fusée de direction » Séparer 3. Conduite de frein avant (2) à ensemble jambe de force » Séparer 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 16 5. Écrou de porte-fusée de direction (1) » Déposer [2x] 6. Boulon de porte-fusée de direction (2) » Déposer [2x] 7. Boulon de montage de jambe de force de suspension avant (1) » Déposer [4x] JETER les boulons. 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 17 Le ressort hélicoïdal est comprimé sous une très grande pression et peut devenir un projectile s'il est séparé de la jambe de force avant que l'on ait libéré toute la tension. 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 18 L'ensemble jambe de force DOIT être posé en orientant vers l'intérieur la plus grande nervure de la face de montage de la jambe de force. 2. Placer l'ensemble jambe de force de suspension avant (1) sur le véhicule. 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 19 4. Boulon de porte-fusée de direction (2) » Poser [2x] 5. Écrou de porte-fusée de direction (1) » Poser et serrer [2x] Serrer 1. Premier passage : 100 Nm (74 lb-pi) 2. Passage final : (45-60 degrés) 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 20 10. Descendre complètement le véhicule. 11. Boulon de montage de jambe de force de suspension avant (1) » Serrer [4x] Serrer 1. Premier passage : 35 Nm (26 lb-pi) 2. Passage final : (30-45 degrés) 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 21 6. Supporter le bras inférieur de suspension 7. Écrou de bras inférieur de suspension arrière (1) » Déposer 8. Boulon de bras inférieur de suspension arrière (2) » Déposer JETER le boulon. 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 22 Partie 6 : Pose du ressort hélicoïdal arrière : 1. Isolateur inférieur de ressort hélicoïdal arrière (2) » Poser 2. Isolateur de ressort hélicoïdal arrière (3) » Poser 3. Ressort hélicoïdal arrière (1) » Poser 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 23 7. Boulon d'amortisseur arrière (2) » Poser Poser un boulon NEUF. 8. Écrou d'amortisseur arrière (1) » Poser Serrer 1. Premier passage : 160 Nm (118 lb-pi) 2. Passage final : (90-105 degrés) 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO. SHEET...
  • Página 24 ± 0,8° ± 0,8° Arrière — — — — — ± 0,3° 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO. SHEET DATE REVISION AUTH ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11 WHITE 16 POUND BOND PAPER.
  • Página 25: Juego De Descenso De Suspensión Malibu

    Las partes de Chevrolet Performance están diseñadas, desarrolladas y probadas para exceder sus expectativas de ajuste y función. Por favor consulte nuestro catálogo respecto al Centro Autorizado de Chevrolet Performance más cercano a usted o visite nuestra página en Internet www.chevroletperformance.com.
  • Página 26: Parte 1: Levantamiento Y Soporte Del Vehículo

    Puede ser necesario poner el vehículo con efectos de suelo sobre rampas bajas para permitir que los brazos de levantamiento se ajusten debajo del vehículo y proporcione el espacio necesario para las molduras de estribo instaladas. 23393265 Suspension Lowering Kit...
  • Página 27: Dimensiones Mínimas De Rampa

    1. Quite el ensamble de llanta y rueda frontal. 2. Arnés de cableado de sensor de velocidad de rueda delantera (1) @ Articulación de dirección » Separar 3. Manguera de freno delantero (2) @ Ensamble de puntal » Separar 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 28 5. Tuerca de articulación de dirección (1) » Retirar [2x] 6. Perno de articulación de dirección (2) » Retirar [2x] 7. Perno de montaje de puntal de suspensión delantera (1) » Retirar [4x] DESECHE los pernos. 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 29: Parte 3: Reemplazo De Resorte

    El resorte helicoidal está bajo presión extrema y se puede convertir en un proyectil si el resorte se separa del puntal antes que se libere toda la tensión. 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 30: Procedimiento Preliminar

    El ensamble del puntal se DEBE instalar con las costillas más grandes del montaje del puntal viendo hacia el interior. 2. Coloque el ensamble del puntal de la suspensión delantera (1) en el vehículo 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 31 4. Perno de articulación de dirección (2) » Instalar [2x] 5. Tuerca de articulación de dirección (1) » Instalar y apretar [2x] Apriete 1. Primer pase: 100 Nm (74 lbs. pie) 2. Pase final: (45-60 grados) 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 32 10. Baje el vehículo completamente. 11. Perno de montaje de puntal de suspensión delantera (1) » Apretar [4x] Apriete 1. Primer pase: 35 Nm (26 lbs. pie) 2. Pase final: (30-45 grados) 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 33: Parte 5: Desinstalación De Resorte Helicoidal Trasero

    6. Soporte el brazo de control inferior. 7. Tuerca de brazo de control inferior de suspensión trasera (1) » Retirar 8. Perno de brazo de control inferior de suspensión trasera (2) » Retirar DESECHE el perno. 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 34: Parte 6: Instalación De Resorte Helicoidal Trasero

    Parte 6: Instalación de resorte helicoidal trasero: 1. Aislador inferior de resorte helicoidal trasero (2) » Instalar 2. Aislador de resorte helicoidal trasero (3) » Instalar 3. Resorte helicoidal trasero (1) » Instalar 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO.
  • Página 35 7. Perno de amortiguador trasero (2) » Instalar Instale un perno NUEVO. 8. Tuerca de amortiguador trasero (1) » Instalar Apriete 1. Primer pase: 160 Nm (118 lbs. pie) 2. Pase final: (90-105 grados) 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO. SHEET...
  • Página 36 ± 0.8° ± 0.8° Trasero — — — — — 0.0° ± 0.3° 23393265 Suspension Lowering Kit IR 19NO15 TITLE PART NO. SHEET DATE REVISION AUTH ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11 WHITE 16 POUND BOND PAPER.

Tabla de contenido