Connecting The Power Cord And Turning On The Power; Specifying The Initial Settings; Selecting The Method To Connect The Machine; Direct Connection - Canon imageCLASS LBP253dw Introducción

Connecting the Power Cord and Turning ON
the Power
2
Do not connect the USB cable at this time. Connect it when
installing software.
Principle of Describing the Operating Instructions
This Getting Started Guide describes the operating
instructions using illustrations of the LBP253dw's screen.
In following some operating instructions, such
as "select ...," the operation you perform differs,
depending on the model of the machine.
● LBP253dw
Paper Settings
Multi-Purpose Tray
Drawer 1
Drawer 2
Register Custom Paper
Select Frequently Used Paper Sizes
Tap the item the
operating instruction
refers to.

Specifying the Initial Settings

The first time you turn ON the power, follow the instructions
on the screen. For details on navigating the menu and how to
input the numbers, see "Navigating the Menu and Text Input
Method" on p. 8.
Complete settings starting with language
●
and through to date and time
Follow the instructions on the screen, set the language,
region, time zone, and date and time.
Language
English
Japanese
French
Spanish
German
Italian
1
● LBP251dw
Paper Settings
Multi-Purpose Tray
Drawer 1
Drawer 2
Register Custom Paper
Use [▲], [▼], [ ◄ ], or [ ► ]
to select the item the
operating instruction
refers to, and press .
OK
Current Date/Time Settings
10/10/2015 10:26 AM
(0:00-12:59)
Apply
Selecting the Method to Connect the
Machine
Connecting via a Wired LAN
●
You can connect the machine to a wired router. Use the LAN
cables to connect the machine to the wired router (access point).
Connect the computer to the router by cable or wirelessly.
Make sure that there is an available port in the router to connect
the machine and the computer.
Have a LAN Cable of Category 5 or higher twisted-pair cable ready.
Connecting via a USB cable
●
You can connect the machine to the computer using a USB
cable.
Make sure that the USB cable you use has the following
mark.
Connecting via a Wireless LAN
●
You can connect the machine to a wireless router*. Since it
is connected to wireless, no LAN cables are needed.
* A wireless router (access point), which supports IEEE802.11b/g/n,
is required.
Connect the computer to the router by cable or wirelessly.
Check if your router has a button
Select from the following two methods, depending on the
router (access point) that you are using.
● There is a button.
You can easily setup if your router (access point)
has a button, and if the mark is on the router.
● There is no button.
If there is no button on your router (access point), you
may manually select SSID and complete the settings.
NOTE
If you are looking to install your new device via a wireless
network connection, you can find a video and written
guides with step-by-step instructions to assist you through
the process from the following URL:
www.usa.canon.com/WirelessHelp
Viewing these guides will ensure a smooth setup of the
device into your existing wireless environment.

Direct Connection

●
Connect a mobile device to the machine wirelessly and
directly without routing through a wireless LAN router (or
access point)
e-Manual "Can Be Used Conveniently with a Mobile
Device" ► "Connecting to a Mobile Device" ► "Make
Direct Connection (Access Point Mode)"
En
9