Part List; Headrest Adjustment - NORAUTO 2274436 Manual De Instrucciones

7. If the vehicle seat has an adjustable seat-back angle, make sure the seat-back is securely locked open in its most upright position. An
incorrect seat-back angle or unsecured seat-back will impair the restraint installation and its ability to protect the child occupant.
8. DO NOT use this child restraint if the child's ears are above the back of the child restraint headrest.
9. NEVER try to tend to a crying child's needs while driving. Never take a child out of the child restraint for comforting while the vehicle
is moving.
10. DO NOT allow a child to have objects such as lollipops or ice cream on a stick. These objects can injure the child if the vehicle swerves
or hits a bump.
11. Put sharp or heavy items in the trunk. Anything loose can be deadly in a crash.
12. In cold weather a child may need an extra blanket for warmth. Put the child in the child restraint and cover both the belted child
and the child restraint with a blanket.

PART LIST

1. Headrest cover
2. Belt guidance 1
3. Backrest
4. Seat cover
5. Base
6. Headrest
7. Belt guidance 2
8. ISOFIX release button
9. ISOFIX locking arms
10. ISOFIX attachment point
ASSEMBLING, DISASSEMBLING, ATTACHING SEAT COVER
NEVER use this child restraint without its backrest. Backrest disassembly step is for attaching and removing the seat cover only!
1. By pushing the backrest down, lower the child restraint into a flat position, as shown in the pictures below.
2. When unfolded, the hook at the bottom of the backrest can be easily lifted out of the sockets on the rear of the booster seat.
the seat and the backrest apart.
3. Set headrest in the highest position. Place seat cover over the seat
bottom, headrest and the backrest. Then, place the seat cover into splints.
4. Pull the elastic band downwards.
5. Then, tight the elastic band on the hooks.
6. Combine the base with the backrest, as shown in the picture. Make sure the hooks are secured. Push the latches down until they click into place.
7. Raise the support back.
USAGE

HEADREST ADJUSTMENT

1. Press the headrest adjusts button, and move the headrest up or down to the desired position.
2. Release adjust button and slide headrest slightly up or down to lock into the appropriate use position.
NOTE: Headrest has 4 height
NOTE: A correctly adjusted headrest ensures optimal protection of the child in the child restraint.
IMPORTANT: The lower edge of the headrest should be at a finger distance from the child's shoulder.
INSTALLATION
WARNING: If the child is not secured properly, the child could be ejected in a sudden stop or crash, resulting in serious injury or death.
WARNING: If in doubt about the installation, consult either the child restraint manufacturer or the retailer.
GROUP II, III (15-36 KG)
1. Place child restraint forward-facing (in the direction of travel) in proper seating location, flat on the vehicle
seat bottom and touching vehicle seat-back.
2. Press the ISOFIX button to pull out the two ISOFIX locking arms from the base bottom.
audible CLICK! Ensure that the indicator turns into a red colour, which means ISOFIX attachments are
unlocked.
NOTE: The ISOFIX attachment points are located between the surface and the backrest of the vehicle seat.
3. Align ISOFIX attachments to the metal anchorages at the bottom of the car seat's backrest and push it until it
clicks. You will hear an audible CLICK! Ensure the both sides of the ISOFIX locking arms turn into green safety
colour.
CAUTION: After the ISOFIX installation check if the child restraint is securely fitted. If the child restraint is not
stable and is shaking, reinstall.
You will hear an audible CLICK!
positions. The height can be changed for child comfort.
1
6
2
7
3
4
5
8
10
You will hear an
CLICK
EN
9
Pull
23