Aux In Mode - Silvercrest 2AJ9O-SKBL56A1 Manual De Instrucciones

■ Speak into the device microphone
■ You can switch the audio source at any time via your smartphone . To do so,
please follow the operating manual of your smartphone .
■ After finishing the call, the playback of the audio file will be continued auto-
matically .
Functions of the buttons
Depending on the smartphone used, not all functions described will be
available.
Function
Accept call Press once (for incoming call) .
End call Press once (during call) .
Press and hold for approx . 2 seconds (for incoming
Reject call
calls) .
Call last-dialled
Press 2 times
number
SKBL 56 A1
IB_282774_Bluetooth_SKBL56A1_LB9.indb 11
to make your call .
button

AUX IN mode

You can also listen to music from an audio device connected via a 3 .5 mm (0 .14")
jack cable . Stereo operation is not possible in AUX IN mode . An existing
Bluetooth connection is terminated .
♦ Make sure that both speakers are turned off .
♦ Press and hold the button for about 2 seconds to turn a speaker
on . You will hear a beep and the operating/charging LED
orange und blue .
♦ Use a 3 .5 (0 .14") mm jack cable
3 .5 mm (0 .14") jack socket (AUX IN)
♦ Start playback on the audio device and set the volume to a moderate level .
♦ Then set the desired volume using the
on the speaker .
♦ Press the button if you want to mute the speaker .
will flash
to connect the audio device to the
of the speaker .
button or the button
11 ■
US-EN │
16.01.17 11:28