Operating The Speakers In Stereo Mode - Silvercrest 2AJ9O-SKBL56A1 Manual De Instrucciones

Operating the speakers in stereo mode

You can also operate both speakers at the same time from the same Bluetooth
device . In this case, each speaker will play back one audio channel .
Make sure that the speakers are turned off and the Bluetooth
♦
turned on .
Set the Bluetooth device so that it scans for other Bluetooth
♦ ®
A detailed description of how to do this can be found in the operating
instructions for your Bluetooth
♦ Press and hold the
on and activate the Bluetooth
operating/charging LED
nects automatically to an already paired Bluetooth
then terminate this connection . To do this, hold down the
and the button (
until you hear a beep .
SKBL 56 A1
IB_282774_Bluetooth_SKBL56A1_LB9.indb 9
®
device .
®
button for about 2 seconds to turn a speaker
function . You will hear a beep and the
®
will flash orange und blue . If the speaker con-
® playback device,
)of the affected speaker for about 2 seconds
♦ Repeat the process with the second speaker . Wait a moment . If the speakers
do not automatically pair with each other, place one of the speakers manu-
®
ally into pairing mode . To do this, hold down the
button (
device is
you hear a higher-pitched beep . Wait a moment . As soon as the two speak-
ers automatically pair with each other, the operating/charging LEDs
both speakers will light up blue . You will hear a beep .
® devices .
Select SKBL 56 A1 from the list of found devices on your Bluetooth
♦
device to pair it to a speaker . You will hear a short beep when the connec-
tion has been established successfully . The operating/charging LED
the connected speaker will also permanently light up orange . This speaker
will output the left stereo channel .
button
) of the affected speaker for about 2 seconds until
US-EN
button and the
of
®
on
9 ■
│
16.01.17 11:27