Steren SEG-510 Manual De Instrucciones página 6

Replacing the batteries
1.- Open the door.
2.- Open the battery compartment cover, remove old batteries and
replace them for new ones. Pay attention to polarity.
3.- Replace the battery compartment cover.
Always replace all the batteries at once, and never use old and Always replace all the batteries at once, and never use old and
fresh batteries together fresh batteries together
Do not mix different types of batteries Do not mix different types of batteries
REGISTERING FINGERPRINTS
The secure box does not include any fi ngerprint in their memory, you
must register at least 2 different types of fi ngerprints before using it.
1.- Open the door using the security key.
2.- Press the green button, the LED indicator will light in green, two
beeps will sound and the fi ngerprint sensor will light on.
3.- Place the forefi nger over the fi ngerprint sensor, it will turn off and you
will hear two beeps, remove the fi nger and immediately place it again,
remove it and repeat the process once again. You will hear a long beep,
indicating the process was successful.
Three beeps at the end of the process means it was not successful Three beeps at the end of the process means it was not successful
If you hear three beeps after pressing green button, the memory is If you hear three beeps after pressing green button, the memory is
full full
You can store up to 30 digital prints You can store up to 30 digital prints
If the memory is full, you must restart the box If the memory is full, you must restart the box
ENGLISH-06