Opening The Box - Steren SEG-510 Manual De Instrucciones

To improve the fi ngerprint recognition process, follow these
recommendations:
• Before starting fi ngerprint recognition process, clean your
fi ngerprint
• Each user must register between 2 and 4 different fi ngerprints
• Women and child should use middle or thumb fi ngers to register a
fi ngerprint
• During fi ngerprint recognition, softly press the fi ngerprint sensor
window
• Keep free of dust the fi ngerprint sensor window
• If the environment of use is dry, breath on your fi ngerprint before to
use the box
1.- Press Start button, the fi ngerprint sensor window will light up.
2.- Place your fi nger over the window.
3.- If the process is correct, the indicator LED will light in green and you
will hear a long beep.
4.- Slightly, turn the knob to the left, then turn to the right and pull out,
the door will be open.
5.- If the indicator LED turns in red and you hear three beeps, you must
repeat steps from 1 to 4.
Remember, you have 6 seconds to open the door, otherwise, the Remember, you have 6 seconds to open the door, otherwise, the
system will close the door automatically, and you should repeat system will close the door automatically, and you should repeat
the opening process. the opening process.

OPENING THE BOX

ENGLISH-07