Functions And Cleaning; Start-Up; Stopping - Zummo Z06 NATURE Manual De Usuario

6. FUNCTIONS AND CLEANING


It is advisable to turn the machine off at the mains before starting any cleaning processes.

Do not wash the machine using water jets and/or water at high pressure.

We recommend at least one daily clean of the components in the juice squeezing zone (cups,
squeezing balls, drip tray, filter, blade and cover), following the cleaning instructions.

The product provided by the machine is citrus juice with a pH level of 4.5, which is not considered
as being a potentially dangerous foodstuff.
6.1. INITIAL START-UP

Depending on the size of the oranges to be squeezed, select the correct size of cup and ball and
the fruit classifier for the basket and position the lower fruit classifier correctly. See the section on
ACCESSORIES.

Fit all the parts in their correct positions. See assembly in the section on CLEANING.

Once the machine is turned on, the display will show a number between 1 and 50 or the letter C.
The number indicates the quantity of oranges to be squeezed and the letter C means that oranges
will be squeezed without interruption for approximately 30 minutes.

Depending on the number of oranges that you want to squeeze, keep pressing the SELECT button
and the number on the display will increase from 1 to 50, and then the letter C will appear
(1,2,3,..........48,49,50,C,1,2,3.....). If you keep the SELECT button depressed for more than 3
seconds, the number will decrease.

Perform this operation until the desired quantity appears.

Once a quantity is selected and an operation is performed, the machine will store this information
(even if it is shut off) until a new selection is made.

When the ON button on the panel is pressed, the machine will squeeze the number of oranges
shown on the display. During the process, the number of oranges left to squeeze will appear on the
display. If you want to repeat the operation, simply press the ON button. To stop the process, press
the STOP button.

6.2. STOPPING

To stop the machine when is operation, press the Stop button. The display will show a timer and the
message Stop. The machine will stop once the Cups have reached the vertical position. Once the
machine completely stops, the display will show again the number of fruits to squeeze.
29