Publicidad
IMPORTANT! Center the alignment slot of lower pole section (6) in the lower
4.
hole of middle pole section (4) as shown. While maintaining alignment, bounce
top and middle pole assembly (4 & 5) onto bottom section of pole (6) using wood
scrap as shown until they no longer move toward taped reference mark.
NOTE: Pole sections should have a 3-1/2" (9 cm) minimum overlap.
5
6
5.
Install rod (7) through holes in bottom pole section (6) and eyebolt (8).
7
8
P/N 214994B
05/03
WOOD SCRAP
5
6
8
10
4
5
6
4
6
7
Publicidad
