Publicidad
SECTION C: APPLY HEIGHT AND MOVING LABEL & SECURING SYSTEM
Carefully upright assembly. Apply moving system label (15) to front of pole as
1.
shown. Regulation rim height is 10 feet (3.05 m).
15
Place assembled unit to desired location. Fill tank with water (30 gallons (114 liters))
2.
or sand (360 lb. (163 kg)) and snap tank cap (30) in place.
Insert T-strap (29) through slot on back of base as shown. Secure unit to ground by
twisting tie down stake (27) into ground and hooking T-strap (29) onto tie down
stake (27).
29
30
P/N 214994B
05/03
10 feet
(3.05 m)
29
WARNING!
TWO PEOPLE
REQUIRED FOR THIS
PROCEDURE. FAILURE
TO FOLLOW THIS
WARNING COULD
RESULT IN SERIOUS
INJURY AND/OR
PROPERTY DAMAGE.
18
WARNING!
DO NOT LEAVE
ASSEMBLY
UNATTENDED WHEN
EMPTY; IT MAY TIP
OVER.
29
27
Publicidad
