Publicidad
1.
Remove contents from tank
IMPORTANT! Center the alignment slot of middle pole section (5) in the
3.
lower hole of top pole section (4) as shown. While maintaining alignment,
bounce middle section of pole (5) into top section of pole (4) using wood scrap
as shown until they no longer move toward taped reference mark.
NOTE: Pole sections should have a 3-1/2" (9 cm) minimum overlap.
1
TAPE (Not Supplied)
WOOD SCRAP
(NOT SUPPLIED)
9
2.
Correctly identify each pole
section and mark indicated
distance from ends with tape
(not supplied) as shown.
MIDDLE
5"
(13 cm)
BOTTOM
5"
(13 cm)
4
TOP
5
6
5
4
05/03
P/N 214994B
Publicidad
