Using The Camera; Setting Date And Time - Cool-Icam S3000 Guía Rápida De Uso

1 Cover Lens
2
LED Indicator
3 Power / Shutter Button
4
Record & Stop Slide Switch
5 Camera Back Cover
6 Tripod Socket
7 Strap Vent
8 Cover Latch
9 Video Resolution Slide Switch
10
MicroSD Card Slot
11
12
Mini USB Slot

4. Using the Camera

4.1 Charging up Your Camera
Charge your camera with either USB cable (included) or AC/DC adapter (not included). The red LED
lights up to indicate the camera is charging and it will turn off as soon as the camera has been fully
charged. It takes about 2 hours to fully charge the camera.
4.2 Inserting a Memory Card
Insert a MicroSD card (not included) before using your camera. Ensure
that the camera power is turned OFF before inserting the card into the
slot.
Notes
1. There is only one correct direction to insert the MicroSD card into
the slot. Do not force the card into the card slot as it may damage
both the camera and the MicroSD card.
2. A new MicroSD card should be formatted before using. For more information, please see section 5

4.3 Setting Date and Time

You can set the camera's clock with the software to ensure that your video and photo files are saved with
the correct date/ time information.
To set up the camera clock
1. Connect your camera to a computer with the USB cable. Run Cool- iCam.exe from your MicroSD
card folder. If you are a MAC user, run Cool- iCam.app instead
2. Find the "Date and Time" and click "SET".
Reset
High quality lens
Show the camera status
1. Turns the camera on or off
2. Takes single photograph
Slide to start or stop video recording
Rotate to seal the camera for waterproofing
Attaches the Cam Locker or other mounts using similar
tripod screw
Loop with wrist or secure strap
Locks the back cover
Select video resolution: HD or WVGA
Micro SD card storage location.
Resets the camera
1. Connects to your computer for data transfer or camera
setup
2. Charge your camera
EN-2