Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
Electrical
Shock
Or Personal
Injury
Hazard
Disconnect
electrical
supply
before
servicing
or cleaning
the unit,
Failure
to do so could
result in elec-
trical
shock
or personal
injury
from
cleaner
suddenly
starting,
Frequently
check and remove hair, string
and lint build-up in the brush area. If build-
up becomes
excessive, follow the steps
below.
TO REMOVE BELT
Disconnect
power cord from electrical outlet.
Carpet/Bare
Floor Selector
To Carpet
Position
Place the
carpet/bare
floor selec-
tor in the
carpet posi-
tion and
lower han-
dle to lay
vacuum flato
Slide latches
outward and
remove noz-
zle cover.
Nozzle
Latches
Agitator
Cover
Furniture
Guard
Retainer
Unfasten the
furniture
guard retain-
ers from the
posts on both
sides of the
agitator
cover.
_
Tabs
Agttatol
Cover'_
._
Depress tabs on
rear of agitator
cover and rotate
forward to
release from the
nozzle body.
The light bulb socket assembly does not
have to be removed.
Lay the agitator cover
over to the side out of the way.
Agitator
Belt
Spare
Bett
Position hands on the agitator° If the belt is
still attached
to the agitator, there will be
tension on the agitator, Carefully lift the right
end of the agitator and then the left end.
Note: it may be necessary
to pull the edge
of the furniture guard out of the way to allow
the ends of the agitator to be removed easily
Remove the belt from the motor drive shaft.
A spare belt is provided,, See above illustra-
tion for location of spare belt,, You may keep
a spare belt in this location any time,
WARNING
Personal
Injury
Hazard
Be careful when removing
the agita-
tor as the belt tension
is high,
Failure to do so could result in per-
sonal injury
from the agitator releas-
ing quickly and snapping
away.
18
Publicidad
