Pro Force GHM-105890DPT Manual De Instrucciones página 4

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• Dress properly. Do not wear loose clothing or jewelry. keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry or long
hair can be caught in moving parts.
• Do not place hands or tools (shovel) in or around the drum while
operating. Personal injury could occur.
• Keep the drum opening in view when adding aggregate (gravel), cement
and sand. Concrete mix bags and other materials can block the view of the
drum opening and personal injury could occur.
CEMENT MIXEr USE AND CArE
• Disconnect the plug from the power source before servicing, adjusting,
installing accessories or attachments. Such preventive safety measures
reduce the risk of accidental starting.
• keep the cement mixer clean. Clean after each use.
• Ensure drum is empty of all material before transporting.
• Do not transport the cement mixer while operating. Personal injury or
damage to the cement mixer could occur.
• Ensure drum is rotating when filling or emptying the mixer. This ensures
a good mix and prevents damage to the motor.
• Do not overload mixer. See Specifications for load capacity. Overloading
could cause damage to the cement mixer.
• Never leave cement mixer running unattended.
• Store cement mixer out of the reach of children.
• Do not allow persons unfamiliar with the cement mixer or these
instructions to operate the cement mixer. Cement mixers are dangerous in
the hands of untrained users.
• Maintain the cement mixer. Check for wear and damaged parts. Before
each use ensure the cement mixer operates properly. Any broken or missing
parts must be repaired or replaced before using. Many accidents are caused by
poorly maintained cement mixers.
• Be familiar with concrete mix being used, particularly quick set
formulas. This is important when motor overload protection shuts off the motor
to prevent motor damage.
• Only use accessories recommended by the manufacturer.
• Always practice environment pollution procedures. Clean the cement
mixer in a designated area where the concrete and rinse water can be
contained. Concrete and rinse water can pollute storm drains and surface water.
• Use the cement mixer in accordance with these instructions, taking into
account the working conditions and the work to be performed. Use of
the cement mixer for operations different from those intended could result in a
hazardous situation.
SErvICE
• Have the cement mixer serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the cement
mixer is maintained.
SAvE THESE INSTrUCTIONS
FOr FUTUrE USE
4 - ENG

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido