Surface SUVC300 Guia De Inicio Rapido página 6

Tour of the Stereo Alarm Clock
with UVC Sanitizer
DISPLAY
AM and PM indicators show if the time displayed is AM or PM in 12-
hour time format.
indicator turns on during sanitization and turns off when the
sanitization cycle is complete. This indicator flashes continuously if the
cover is open when you try to start sanitization.
indicator flashes when pairing with a new devices. It turns solid
when connected.
and indicators show if alarm 1 and/or alarm 2 are active.
indicator turns on when the backup battery needs to be replaced.
See step 1 for details.
FM indicator turns on in radio mode.
TOP AND SANITIZATION BAY
TUNE + and – buttons scan for FM stations (press and hold) or fine
tune the FM radio frequency (press).
button turns on the built-in nightlight and goes to the next
brightness setting (high, medium, low, and off).
VOL/SET + and – buttons adjust the flashing digits when setting the
time or alarm. They also adjust the volume when listening to FM radio
or Bluetooth audio.
SNOOZE/ bar temporarily delays the alarm another 9 minutes
until you turn it off. In Bluetooth audio mode, this bar plays or pauses
playback. It also adjusts the display brightness in other modes.
and buttons let you set the alarm times (press and hold) or turn
each alarm on/off (press).
button starts the sanitization process once the top is closed. You
can choose the standard cycle (press) or deep clean cycle (press and
hold). Press this button during a sanitization cycle to stop the cycle
before it's complete. The indicator flashes three times to indicate the
cycle has stopped and it's safe to open the cover.
6
button lets you set the time (press and hold) or display the current
time (press). In radio mode, this button goes to your next preset station
(press) or sets the current station as a preset (press and hold).
FM/ button toggles between FM radio (one press), Bluetooth audio
(two presses), and audio off (three presses). It also starts Bluetooth
pairing (press and hold) in Bluetooth mode.
The sanitization bay is where you put the item you want to sanitize.
Once you've closed the top and pressed the
the bay receives a bath of UVC rays that kill bacteria and viruses.
IMPORTANT: The UVC lights automatically turn off when the top of the
bay is opened.
The charging port charges your mobile device when the clock/
sanitizer is plugged in. Just plug your charging cable into the port—your
device charges both when the clock/sanitizer is sanitizing and when it's
not.
About UV sanitizing
Ultraviolet (UV) light is invisible to the human eye. The UVC part of the
UV spectrum is proven to have germicidal benefits, killing bacteria
and deactivating viruses. It is important to use the product with
appropriate safeguards and follow safety precautions.
UV light is most effective on hard, non-porous surfaces such as
phones, most phone cases, keys, credit cards, etc. UV light is less
effective against fabrics and other porous materials because of the
many shadows they create that may block the UV light from hitting
the surface. The UV light can only kill germs on surfaces with which it
comes in contact.
button, the item in