Before You Begin; Tools Needed - Barrette BOM-34107825 Manual Del Usuario

WARNING:
• Improper installation of this product can result in personal injury. Always wear safety goggles when
cutting, drilling and assembling the product.
• Incorrect installation may cause harm to the gate or individual.
• Not pool code approved.
• Do not allow children to play with the gate.
NOTICE:
• DO NOT attempt to assemble the kit if parts are missing or damaged.
• DO NOT return the product to the store, for assistance or replacement parts call: 1-800-336-2383.

BEFORE YOU BEGIN:

Vinyl gate posts require an internal support
system for weight-bearing purposes
therefore a post stiffener is required. Post
stiffener needs to be purchased separately.
Fence
Top View of Routed Post Top View of Routed Post
NOTE: Components shown are for visual reference only and may not depict the exact style of
your product. Please see product label for correct number of pieces.
Lattice Top Gate
Component list:
Description
Lattice
Boards
Top Rail
Middle Rail
Bottom Rail
Gate Uprights
Upright Inserts
Upright Caps
Screws
Vinyl Cement
Hinges
To obtain and review a copy of the warranty please go to: BarretteOutdoorLiving.com/warranty. You can
also contact 1-800-336-2383 or write to Barrette Outdoor Living, 7830 Freeway Circle, Middleburg Heights,
2
Ohio 44130 to obtain a copy of the warranty.
Purchased
Stiffener
Upright
Inserts
Hinges Hinges
Screws

TOOLS NEEDED:

Phillips Screwdriver
Safety Glasses
Line Level
Tape Measure
Drill
#2 Square Drive Bit
Gate Hardware (Latch)
Lattice Top
Lattice
Boards
Vinyl
Cement
Upright
Cap
Top Rail
Middle Rail
Bottom Rail
Gate
Upright