Before You Begin; Tools Needed; Additional Components - Barrette SELECT Serie Manual Del Usuario

WARNING:
• Improper installation of this product can result in personal injury. Always wear safety goggles when
cutting, drilling and assembling the product.
• Incorrect installation may cause harm to the product or individual.
NOTICE:
• DO NOT attempt to assemble the kit if parts are missing or damaged.
• DO NOT return the product to the store. For assistance or replacement parts call: 1-800-336-2383.

BEFORE YOU BEGIN:

Vinyl rail posts require an internal
support system for weight-bearing
purposes and therefore a post install
kit or wood post is required inside a
post jacket. Post install kit and wood
post need to be purchased separately.
Rail Rail
Top View of Post Jacket
Rail & Stair Rail
Components:
Description
Top Rail
Bottom Rail
Balusters
Support Brace(s)
⁄ " Screws
3
4
Level Brackets & Screws (for Rail Kit)
Stair Brackets & Screws (for Stair Kit)

Additional Components:

(Sold Separately)
Description
Angle Brackets
Post Jacket
Base Trim
Post Top
To obtain and review a copy of the warranty please visit barretteoutdoorliving.com. You may also contact
us at 1-800-336 2383 or email Cs.outdoorliving@ebarrette.com
2
Purchased
Post Install Kit
Rail Kit
Balusters Balusters
Support Brace
Level Brackets & Screws
Angle Brackets
& Screws

TOOLS NEEDED:

Tape Measure
Level
Hacksaw or Chopsaw
Rubber Mallet
Drill
#2 Square Drive Bit
⁄ " & ⁄ " Drill Bit
1 5
8 32
Pencil
Temporary Deck Board
Safety Glasses
Clamps
3" Spacer Blocks
Stair Rail Kit
Top Rail
Bottom Rail
Post Top
Top Rail
Balusters Balusters
Bottom Rail
Stair Brackets & Screws
Base Trim Post Jacket