Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING:
• Improper installation of this product can result in personal injury. Always wear safety goggles when
cutting, drilling and assembling the product.
• Incorrect installation may cause harm to the gate or individual.
• Not pool code approved.
NOTICE:
• DO NOT attempt to assemble the kit if parts are missing or damaged.
• DO NOT return the product to the store, for assistance or replacement parts call: 1-800-336-2383.
BEFORE YOU BEGIN:
Vinyl rail posts require an internal
support system for weight-bearing
purposes and therefore a post install
kit or wood post is required inside a
post jacket. Post install kit and wood
post needs to be purchased separately.
Rail
Rail
Top View of Post Jacket
Top View of Post Jacket
Gate Kit
Component list:
QTY
Description
2
Vinyl Uprights
2
Vinyl Rails
2
Aluminum Stiffeners
8
Balusters
4
Caps
1
Gravity Latch
2
Compact Butter y Hinges
6
1" Phillips Square Combo Screws
(For Gravity Latch)
8
1" Phillips Square Combo Screws (For Hinges)
8
#10 2½" Panhead Square Drive Screws
1
Glue
1
Allen Wrench (For Hinges)
To obtain and review a copy of the warranty please go to: Veranda.BarretteOutdoorLiving.com/warranty.
You can also contact 1-877-279-4496 or write to Veranda, 7830 Freeway Circle, Middleburg Heights,
2
Ohio 44130 to obtain a copy of the warranty.
Purchased
Post Install Kit
Aluminum Stiffeners
TOOLS NEEDED:
Tape Measure
Level
Hacksaw
Rubber Mallet
Drill
5
5
5
#2 Square Drive Bit
3" Wood Blocks
Safety Glasses
Pencil
Hinges
Allen Wrench
1" Phillips Square
Drive Screws
2½" Panhead
Square Drive Screws
Routed Vinyl Rails
Caps
Routed Vinyl Uprights
⁄ " and
⁄
⁄
⁄
⁄
⁄
⁄ " Drill Bits
⁄
1
1
1
32
32
8
8
Gravity Latch
Glue
Caps
Vinyl Balusters
Publicidad
